Who doesn’t love a pretty skirt?
I made this style of skirt for my daughter for Christmas last year. She loves it and wears it all the time. When she heard I was going to make her another to do this tutorial, she was thrilled! I even decided to make myself a similar one too…why not? I like pretty clothes and FREE (I have a ton of fabric sitting around…seriously, like 100 yards or something) sounds awesome to me!
All you need to be able to do is do a straight stitch. It is very basic and easy to do this skirt, so it’s a great project for a beginner. Or someone more experienced, because it does make a cute skirt.
You will need:
- 1 – 3 lengths of fabric (depending on how many layers you want to your skirt)
- Matching thread (I use neutral/tan on everything)
- Elastic, 3/4″ or 1″ (depending on size; smaller for a smaller person)
- Measuring tape
I know; I didn’t say how much elastic or fabric you will need. It varies entirely depending on how big you want the skirt. So let’s talk about that part of the skirt tutorial first.
You can choose to make the skirt all one color, two different colors (coordinating colors/patterns), or three colors. So the first thing you need to do is decide how many you want. Got it?
Now, measure yourself or your intended recipient from natural waistline to where you want the skirt to end. I personally prefer a long-ish skirt, falling a couple inches below the knees. I think it’s more modest. But that’s me. It’s up to you how long you want to make yours. To this measurement, you will add 2″ for seam allowance and elastic casing. This is your total skirt length. If you are making it from just one fabric, this is your number.
If you want to make a skirt that is two different colors, divide this number in half and add 1/2″ to each. So, if you want a skirt to be 24″ in length when finished, you will add 2″ — 26″ total. Then you will divide this in half — 13″ each. Add 1/2″ for seam allowance — 13 1/2″ per piece. This is your length per piece.
If you want a skirt that is three different colors, divide your number by 3, then add 1″ to the “middle” piece and 1/2″ to each of the outside pieces. So, if you want a 24″ skirt, you add 2″ — 26″. Then divide by 3 — we’ll call it about 9″ (it’s really 8 2/3″). Add 1/2″ to top and bottom pieces — 9 1/2″ each. The middle section, add an inch — 10″ total.
Now, you need to figure out how big around the skirt needs to be. Measure your waist loosely with a soft tape measure. You will want to add 6″ to this number for your top (or only) tier. This is so you can put in the elastic and have extra fabric there to make it look gathered and pretty. You want 2″ less elastic than the original number.
If you are doing additional tiers, then the second one needs to be 50% wider than the first. The third needs to be 50% wider than the second. This is because you will be gathering it later.
Types of Fabric
I have used all types of fabric for this — light cottons, silky, denims, etc. It seems to work out okay. It’s probably best to use either denims or light to medium weight cottons. Silky fabrics may look a little weird. But, choose what you like; this is forgiving.
The Skirt Tutorial
Okay, it’s to get sewing! Gather up your materials.
Measure yourself (or your intended recipient) if you haven’t already. If, like me, you’ve temporarily lost your tape measure, you can take a rough estimate by wrapping the fabric around yourself and adding the 6″ that way. This worked for us. Cut your first rectangle (your top piece).
The denim is my top fabric. I have it laying on my bottom fabric. I will cut the bottom piece roughly the same width, but 50% longer. Like this.
See how it extends well beyond? That’s how you “measure” if you’ve lost your ruler. This pattern is pretty forgiving. Like I said, it’s simple.
Now it’s time to sew! First you will need to pin the two pieces together, right sides together (if you have three, you will do this next part twice. If you have one, skip this part). Match the ends and the center together. The longer piece will be loose around the pins.
Yes, that’s my daughter’s foot there…she was “helping.”
Now you will sew it. Start at one end, and gather slowly as you go along. I do mine like this. A quick sewing note: always forward stitch a few stitches, then backstitch, then continue sewing normally at the beginning of every seam. It helps to add strength. Do the same at the end — backstitch a bit to make sure it’s sturdy.
I do this about every 1 – 2″ all along the skirt. It works out as a nice little gather. Once you have done this, you will need to sew a second seam just below the first, to reinforce it. It will look like this.
If you have a third tier, repeat the last few steps to get that third tier sewn on. If not, move on.
Fold your skirt in half, right sides together.
Now you will sew a seam down the open side so that the skirt is put together. Almost done!
Now, turn down the top of the skirt (to the inside) to make a casing for your elastic. It should be 1/4″ further than your elastic is wide. I”m using 1/2″ elastic because it’s for my daughter and she’s small. Use bigger elastic for bigger people. Here’s mine folded down.
Sew this casing down, but not all the way.
Leave a couple inches open in the middle, like this:
Take your elastic, and put a safety pin on one end. This will give you something to grip as you put the elastic through. Slip the safety-pinned end into the casing and work the elastic all the way through, making sure not to lose the other end inside!
Once the elastic is all the way through (make sure to keep it flat; don’t let it get twisted or it will be uncomfortable), sew the elastic ends together. Go over them three or four times (forward stitch, back stitch, repeat).
Once it’s sewn together well, allow the elastic to go fully inside the casing. Smooth it out so it’s roughly evenly gathered all around the skirt (you can adjust this later as you’re wearing the skirt, so it is not that crucial now). Sew the opening of the casing closed.
All that’s left to do is hem the skirt. If possible, you will want to try the skirt on now to see how much it should be hemmed. (I did one for my niece as a gift for Christmas so obviously I couldn’t have her try it on. But I do with my daughter.)
The right way to hem it is to fold it up 1/2 as much as you want and pin it and sew it, then fold up again and pin and sew, using a zig-zag if desired. This way you have a nice finished edge on the inside and out.
…or you could be lazy like I was, and just fold it up and sew it once. No one’s going to see, right?
Now your skirt is done! Isn’t that cool? Here’s my little model with her new skirt. She normally hates having her picture taken and runs from the camera, but she was so pleased with her skirt that she agreed to pose for me. She did, however, feel the need to make faces.
How easy was that?