Sprouted grains. I’ve mentioned them before, but I’ve never told you HOW to do it, have I? Hence, today’s tutorial.
Sprouted grains have a ton of health benefits. They’re more easily digested and nutrients more readily absorbed, they are full of extra vitamins, especially B vitamins (did you know that’s why white flour is enriched with B vitamins? Because manufacturers know they should and do contain these, but stripping the bran off gets rid of them), some gluten-sensitive individuals can eat them, they contain few to no anti-nutrients — they’re wonderful! Of course, it’s best to reduce your intake of grains overall, but when you eat them, sprouted grains are the best you can get.
Buying them, though, is extremely expensive. We’re talking about $3/lb to buy it! Since most white flour is only about $0.50/lb and good whole wheat flour (unsprouted) is about $1/lb (as are whole, unground grains), that’s a huge price increase. It may be worth it to some who have more money than time to purchase the sprouted flour, or even to simply buy sprouted grain products, but for most of us, it’s far better use of time and money to sprout it ourselves. And it really is not much work at all. Most of the time it takes is wait time.
*Whole, unground grains (wheat, spelt, kamut, rye, etc.), amount of your choice
*Clean, filtered water
*Dehydrator or oven that goes down to 120 degrees Fahrenheit
If you know that you can tolerate grains well and want to sprout a lot at once, I’d recommend doing 4 – 5 lbs. (which will fit into a 9-tray Excalibur dehydrator). If you don’t have as much space for drying and/or you just want to try it out, don’t do more than 1 lb. this first time.
First, place your grains in a nice, large bowl. You need extra room for water.
Then, pour in enough water to cover the grains by at least an inch. They’ll absorb a lot so check in an hour or so to see if you need to add a bit more. They should be covered completely and will soak overnight or about 6 – 8 hours.
Then, pour the grains into the colander to drain them.
Rinse the grains thoroughly with water. You will do this every 8 – 12 hours until they are sufficiently sprouted (which will take 1 – 2 days). They need to remain wet. If the weather is hot and humid, this is ESPECIALLY important, because otherwise the grains will grow fuzzy mold and need to be thrown out. Guess how I know?
Once your grains have short tails on them, about 1/4″, then are ready. There is no harm in leaving them longer and I often do. Some may be quite a bit longer and this is fine. Rinse them one final time before drying.
See the little tails on them?
Now, put the grains on dehydrator trays or on large baking sheets (the kind with edges).
Put them in the dehydrator (or oven) at about 120 degrees for 4 – 5 hours, until they are completely dry. If they’re not, they could get moldy and will certainly clog your grain mill or blender.
When they are done, transfer them to bags and store in the freezer until you need them. It’s best to grind them as you need them. If you must grind at once, definitely store in the freezer for no longer than one month (otherwise the oils will go rancid and they will lose a lot of vitamins).
You can grind your grains in a special grain mill, or you can use a good quality blender like a Vitamix. I use my Vitamix for grinding mine and can get a coarse texture for a “rustic” type of bread or cracker, or a nice fine texture for smooth, wonderful baked goods. Grinding time is everything.
Sprouted flour can be used successfully in many recipes. It doesn’t bake exactly like unsprouted flour, but it’s pretty similar. Yeasted bread will take longer to rise, but most cookies and quick breads do just fine.
And here’s a pic just for fun:
That’s me and Daniel, about a month ago.
That’s sprouting flour! Easy, no? Have you ever done it before? Do you want to someday?